Fitting a cat flap can appear daunting however it's actually quite easy to do by following the correct instructions. First, determine the height you want the flap to be (on average, belly height). Mark this point on your door and then use the template included to help you drill.

If you have a kitten who is still a baby then gently prop the door slightly open and invite it to go through. Reward the kitten every time it passes.

Measure the Door

A cat flap is a wonderful way to allow your pet to leave and come inside and out of your home whenever it pleases. This will help keep your cat healthy by ensuring that it is getting exercise as well as being able to get back in if left outside in bad weather, particularly during the winter. It also can reduce the amount of time you'll have to let it out or in. It will also help ensure your home is secure by allowing you to know when it's been out.

It is crucial that the flap on your cat is fitted correctly to prevent your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is important to measure your pet's belly height and the doorway of your house so that you can make sure that the flap is at the proper height. If your cat is a little larger or shorter than the average, you can adjust the flap's height by moving it upwards or downwards by a small amount.

Then, use a spirit-level to mark the middle of the door. This is where you will install the flap. Then, using the markings as a guideline, cut out the shape of your flap using the aid of a Jigsaw. Once you've cut the space, sand down the edges of the door to smooth the surfaces. Then drill any fixing holes needed.

Fitting a cat flap should not take more than two hours. The process is slightly more complicated if you are required to put it in the case of a uPVC door or composite one. This is because composite doors come in a variety of thicknesses, which can impact the way the holes are cut. This is why we recommend hiring a professional to carry out the task, especially in the event that you've never worked with glass before.

Measure Your Cat

You can save yourself hours of ignoring the pet meow to be let in or out. This is especially helpful for those who work most of the day and your cat is in the house waiting for you to get home in any weather.

If you're planning to put a cat flap on your door, it is essential to take measurements of your cat prior to attempting the task. Although it might seem like to be a simple task, it is important to get the measurement right or your pet will find it difficult to use.

First of all, make sure that your cat is calm and not feeling stressed before you take the measurements. You'll need to keep your cat flap fitters near me in a place where they cannot move. Also, make sure that the measuring tape is flat and not curved against the body. Holding the ruler or measuring tape against their body from the top of their head to the bottom of their tail will allow you to get an precise measurement.

Once you have your cat's measurement then you can look at the door to determine the best place to place the flap. A good tip is to place the flap in the middle of your cat flap install's belly as this will allow them to pass through it without too much effort. This will also prevent the flap from making a lot noise when it swings back and back.

You will need to think about the thickness of the uPVC or composite door as well. While all timber doors have the same thickness to them, upvc door panel with cat flap fitted or composite doors are different in their overall design. This could make the process of the installation of a flap for your cat more difficult as you must ensure that the hole is the proper size.

It is also worth studying the instructions included with the cat flap kit to locate an outline of the template that can be used to determine the location of the hole in the door. This will allow you to determine the location where the opening should be, and also to ensure that the template is properly placed on the door. Utilizing a spirit level to check that the template is in a straight line against the door will be extremely helpful.

Cut the Flap

You will need to cut an opening in the door to accommodate your cat flap prior to you can put it in place. This can be a tricky job, and it is recommended that you get help from a professional cat flap fitter for this job should you not have the expertise or knowledge to do it yourself. You can also read the instructions provided with the kit to discover how to do it right.

You can use the height of the cat's or kitten's stomach as a reference. A good rule of thumb is to set the flap around 10-15 centimeters off the ground, as this is the typical belly height for cats. This way, your cat will be able to go through the flap comfortably and it will also give other cats or snooping neighbours an issue when trying to leave or enter.

Draw the location of the cat flap on the door using the pencil. If your kit has the template, place it over the door. Use the marks on the template to drill holes at every corner. After that, you'll be able to cut out the template shape and replace it with the cat flap.

You can install your cat flap fitters flap yourself in an uPVC or wood door when you're confident using a jigsaw. Be cautious not to cut through the mullions or rails that run vertically of your door. You can use a jigsaw cut the panel into a circle or square, depending on the design of your cat flap. Remember to take your time and don't force the jigsaw into cutting faster.

Once the hole is cut, carefully place your cat flap in its new home. Make sure it is firmly secured. If the flap has screws then push them into the protruding bolts. After the screws are installed smooth the edges and then apply sealant to any gaps. This will prevent draughts from entering your home.

Place the Flap

If you have a standard cat flap, you can help your pet through it by placing a small amount of cat food on the top of the door. Alternately, you can push the cat through with your hand or a stick. Once your cat is accustomed to walking through the flap, it will be able to come and go whenever it wants. This allows you to let it in and out whenever it's wanted.

It is possible to install a cat flap in an UPVC door or glass door, but it may not be as easy as installing one on a wooden external door. This is due to the fact that the doors made of UPVC and some kinds of glass doors do not have a uniform thickness. This could have a significant impact on how you cut out the flap's hole and whether the flap fits correctly after installation.

Based on the type of cat flap you choose It may come with its own mounting kit and a template that will tell precisely where to drill the holes for it. If the kit does not include a template you can make one on your own. When cutting, it's crucial to avoid pushing the jigsaw too far enough to make a larger hole than necessary in your door.

Most cat flaps are rectangular or square in shape, however there are also some which are circular, and they are typically more difficult to place. If you have a circular flap it's important to make sure the hole is in the proper position on your door, because if it's not, your cat can't use it and may be stuck in the open all day (or even night).

Some models of cat flap have locks that permit you to regulate when your cat comes in and goes. These can be very useful when you're worried about your cat going out at night only to come back in the darkness, or if you're working all day. The lock can be used to allow or deny entry, and some locks can be locked in either direction which allows you to close the door completely, which is especially helpful for sick or elderly cats who aren't willing to go out in rainy weather.